Single Station Gauge Isolators

Gauge life is extended by using the MA 1 when reading pressure. When not reading pressure, the gauge is vented to tank to protect the gauge against pressure from the system There are two ways to operate the MA 1:
Push to read (spring return)
Push to rotate clockwise to lock in for continuous pressure reading

Multi-Station Gauge Isolators

Description

• Zero-Leakage Multi-Station Gauge Isolators, Type MSL 2. Because there is no leakage in this measuring unit, it can be used on holding circuits.
• Multi-Station Gauge Isolators, Type MS 4/MS 6 without gauge are designed to check up to 6/9 different pressures in a hydraulic system. The gauge must be mounted separately and be connected to port M of the gauge isolator by means of a pipe or hose. The pressure is indicated on the pressure gauge when the pointer on the rotary knob is turned to one of the selected positions and pushed in to read. When the knob is released it returns to its original position and the gauge is connected to the tank port. A built-in detent locks any of the selected positions.
• Multi-Station Gauge Isolators, Type MS 5/MS 7 without gauge are designed to check up to 5/8 different pressures in a hydraulic system. The gauge must be mounted separately and be connected to port M of the gauge isolator by means of a pipe or hose. The pressure is indicated when the knob is turned to one of the measuring positions. The gauge can be relieved to the tank by turning the knob to the zero position. A built-in detent locks any of the selected positions

صفحه اصلی  ::   درباره ما  ::   آموزش  ::   پرسش و پاسخ  ::   فرم مشاوره  ::   تماس با ما

کلیه حقوق این سایت متعلق به شرکت رکسان پارسیان می باشد.هر گونه کپی برداری از اطلاعات سایت غیر مجاز می باشد.